Sunday, September 13, 2009

Angle of the dangle

Since my last post, I've fabricated the tiller. I started with a sheet of pink insulation foam and cut it to rough shape with the jig saw. I then (very gingerly) sanded it with a small electric sander and by hand. When I got the overall shape close to where I wanted I wrapped it with a layer of 9oz cloth to give it some strength so I didn't break it while trying to fair it with Microlight filler. After the tiller was fair I wet out slid on one fiberglass sleeve, one carbon sleeve, and one carbon/basalt hybrid sleeve (all from Soller Composites). I like the results!


I also got the non-skid applied to the cockpit and deck last weekend. I had read good things about Kiwi Grip, so i gave it a shot. The stuff is really easy to apply. Working in 2ft sections I troweled the yogurt-like stuff on with a 1/8" V-notch trowel. The roller they include is great and based on the pressure that you use you can dial in just the right amount of "tooth" to the finish.


The Boatworks will be quiet for a couple of weeks, as Traci and I are off to Lake Geneva tomorrow for our wedding this weekend. Then off to Barbados for a week!

The finishing touches will be put on the boat when we return and we WILL get out sailing before the snow flies!

Jeff








No comments: